Deck Restoration in Livingston, Oakland & Washtenaw County

Michigan decks take a beating — snow, sun, and freeze-thaw cycles leave wood grey and splintering. We restore weathered wood with a full wash, strip, brighten, and sand, then protect it with the right stain and sealer for your look.

What's included

  • Wash, strip & brighten
  • Sanding
  • Solid, semi-transparent or clear stain
  • Sealing

Our process

  1. 1Inspect wood condition & recommend finish
  2. 2Wash, strip old stain & brighten
  3. 3Sand smooth & replace any bad boards
  4. 4Apply stain or sealer (your finish choice)
  5. 5Final cleanup & care walkthrough

What Michigan does to a deck

A deck here lives through snow load, freeze-thaw, spring rain, and humid summers. Water gets into the wood, freezes, expands, and opens the grain until the surface turns grey and fuzzy. By the time boards feel rough underfoot and water stops beading, the wood fibers are lifting — and stain can't bond to them. Horizontal surfaces (the floor boards) wear fastest because they hold water and take the sun straight on; verticals like railings usually last longer. Around the lake homes in Livingston and Washtenaw counties, the water side of a deck ages noticeably faster than the side facing the house.

Solid, semi-transparent, or clear

The finish you choose trades grain against protection. Clear shows the most wood grain but offers the least UV defense, so it needs refinishing most often. Semi-transparent balances color and grain — a popular middle ground that enriches the wood without hiding it. Solid stain hides the grain entirely and gives the strongest, longest-lasting color, which makes it the right pick for older or weathered decks where the wood no longer looks uniform. We help you choose based on how much grain you want to see, how much sun the deck gets, and how often you want to refinish.

Restoring grey, weathered wood

Grey or black patches, splintering, and water that sinks in instead of beading all say a deck is overdue. We wash, strip the old finish, and brighten to remove the grey oxidized layer, then sand the surface smooth so the new stain can bond. Severely rotted boards may need replacing — we'll quote those up front so there's no surprise. Prep is the whole job: staining without it is the #1 reason a 'fresh' deck starts peeling the next spring. We schedule around the forecast so the wood is dry to the right moisture content before anything goes on.

Colors to start from

These are the tones we lean into for decks projects — bring us your own and we'll match it.

#8A3B1A
#C8783F
#E9C27D

Before & after

Full gallery →

Decks FAQ

How often should a deck be re-stained in Michigan? +

Most decks need refinishing every 2–3 years. Horizontal surfaces (the floor boards) wear fastest; verticals like railings often last longer.

Solid vs. semi-transparent vs. clear stain — which should I choose? +

Clear shows the most wood grain but offers the least UV protection. Semi-transparent balances color and grain. Solid hides the grain and gives the strongest, longest-lasting color — good for older or weathered wood.

Can you restore badly weathered grey wood? +

Yes. We wash, strip, and brighten to remove the grey oxidized layer, then sand smooth. Severely rotted boards may need replacing, which we'll quote up front.

When's the best time to refinish a deck? +

Late spring through early fall, when the wood is dry and overnight temps stay above the stain's minimum. We schedule around the forecast.

How long until I can walk on it? +

Most stains and sealers are foot-traffic dry within 24–48 hours and fully cured in a few days, depending on product and weather. We'll give you exact guidance for your finish.

Do you seal as well as stain? +

Yes. Our stains include water repellent, and we can apply a dedicated sealer topcoat for extra protection where needed.

Can you replace rotted deck boards? +

Yes. We'll identify any soft or rotted boards during the estimate and quote replacement so the new stain goes on a sound surface.

Do you paint composite decks? +

Composite can be refinished with a specialty bonding coating, though the result is more like a painted surface than stained wood. We'll assess whether it's the right approach for your deck.

Where we work

Decks painting across southeast Michigan

We bring the same careful decks prep and finish to homes across Livingston County, Oakland County, Washtenaw County, Wayne County and the communities around them. If you're searching for decks painting in your city, there's a good chance we already work there — find your community below, or request a free decks estimate and we'll confirm we cover you.

Wayne County

Decks painting in Wayne County, MI — 7 communities served:

Ballpark Price Calculator

Slide, pick, and get a rough range — then we'll confirm it on-site for free.

Service
300 sq ft
1001,500
Add-ons
Surface condition
Estimated range
$900 – $1,800
For decks · 300 sq ft

This is a rough ballpark based on typical Michigan projects — not a quote. Prep, access, product choice, and repairs can shift the final number. We'll confirm the real price on a free on-site estimate.

Get My Free On-Site EstimateUsually 1 business day

Get your free decks estimate

We'll never share your info. No pressure, no spam.